Kyocera Mita KM-1530 Service Manual page 142

Maintenance
item No.
U342 Setting the ejection restriction
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
When the restriction is set, the number of sheets that can be ejected continuously to the internal eject tray will
be limited as shown below.
When the job separator is not installed
When the job separator is installed
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Method
Press the start key.
Setting
1. Select "on" or "oFF" using the zoom +/– keys.
Display
on
oFF
Initial setting: on
2. Press the start key. The setting is set. The indication for selecting a maintenance item No. appears.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The indication for
selecting a maintenance item No. appears.
Description
No. of sheets to be ejected
to the internal eject tray
250
150
Description
The number of sheets restricted.
The number of sheets not restricted.
2AV/X
1-4
1-4-93