Kyocera Mita KM-1530 Service Manual page 90

Maintenance
item No.
U260 Changing the copy count timing
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request.
If a paper jam occurs frequently in the finisher when the number of copies is counted at the time of paper
ejection, copies are provided without copy counts. The copy service provider cannot charge for such
copying. To prevent this, the copy timing should be made earlier.
If a paper jam occurs frequently in the paper conveying or fixing sections when the number of copies is
counted before the paper reaches those sections, copying is charged without a copy being made. To
prevent this, the copy timing should be made later.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the copy count timing using the cursor up/down keys.
Display
COUNT: FEED
COUNT: EJECT
Initial setting: EJECT
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U265 Setting the destination specifications
Description
Sets whether or not to print the product name on the reports that users print.
Purpose
To be set according to user request.
Method
1. Press the start key. The screen for executing is displayed.
2. Enter "0" or "2" using the numeric or cursor right/left keys.
Setting
0 Product name printed
2 Product name not printed
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
When secondary paper feed starts
When the paper is ejected
Description
2AV/X
1-4
1-4-41