Kyocera Mita KM-1530 Service Manual page 139

2AV/X
Maintenance
item No.
U258 Switching copy operation at toner empty detection
Description
Selects if continuous copying is enabled after toner empty is detected, and sets the number of copies that can
be made after the detection.
Method
Press the start key. The current setting is displayed.
Start
1. Press the start key. A selection item appears.
2. Select the item by lighting image mode LEDs using the image mode selection key.
Image mode LEDs
1-4
Setting copy operation at toner empty detection between single and continuous copying
1. Select single or continuous copying using the zoom +/– keys.
Display
Sin
Con
Initial setting: Sin
2. Press the start key. The setting is set.
Setting the number of copies after toner empty detection
1. Set the number of copies that can be made using the zoom +/– keys.
Description
Number of copies after toner empty detection
The setting can be changed by 5 copies per step.
When set to 0, the number of copies is not limited regardless of the setting for single or continuous copying.
2. Press the start key.
Completion
Press the stop/clear key while a selection item is displayed. The indication for selecting a maintenance item
No. appears.
1-4-90
Auto Exposure
Text & Photo
Photo
Text
Auto Exposure
Text & Photo
Photo
Text
: Off, : On
Description
Description
Switching copy operation at toner empty detection between
single or continuous copying
Setting the number of copies after toner empty detection
Description
Enables only single copying.
Enables single and continuous copying.
Setting range
0 to 200 (copies)
Initial setting
70