Kyocera Mita KM-1530 Service Manual page 86

Maintenance
item No.
U250 Setting the maintenance cycle
Description
Displays and changes the maintenance cycle.
Purpose
To check and change the maintenance cycle.
Method
Press the start key. The current setting is displayed as follows:
Maintenance cycle (number of copies) = setting × 1000
Setting
1. Change the setting using the cursor left/right keys.
Description
Maintenance cycle
For example, when set to 120, the maintenance cycle is set to 120000.
2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
U251 Checking/clearing the maintenance count
Description
Displays, clears and changes the maintenance count.
Purpose
To check the maintenance count. Also to clear the count during maintenance service.
Method
Press the start key. The maintenance count is displayed.
Clearing
1. Select CLEAR using the cursor up/down keys.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is
displayed.
Setting
1. Enter a six-digit count using the numeric keys.
2. Press the start key. The count is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting
a maintenance item No. is displayed.
Description
Setting range Initial setting Change in value per step
0 to 600 100 1000 (copies)
2AV/X
1-4
1-4-37