Kyocera Mita KM-1530 Service Manual page 175

(15) Image is partly miss-
ing.
Causes
1. Paper damp.
2. Paper creased.
3. Drum condensation.
4. Flawed drum.
(16) Fixing is poor.
Causes
1. Wrong paper.
2. Defective pressure springs.
3. Flawed press roller.
(17) Image is out of
focus.
Causes
1. Defective image scanning unit.
(18) Image center does not
align with the original
center.
Causes
1. Misadjusted center line of image printing.
2. Misadjusted scanner center line.
3. Original placed incorrectly.
Causes
1. Paper damp.
2. Paper creased.
3. Drum condensation.
4. Flawed drum.
Check the paper storage conditions.
Replace the paper.
Clean the drum.
Replace the drum (see page 1-6-43).
Causes
1. Wrong paper.
2. Defective pressure springs.
3. Flawed press roller.
Check if the paper meets specifications.
Replace the pressure springs.
Replace the press roller (see page 1-6-53).
Causes
1. Defective image scanning unit.
Replace the image scanning unit (see page 1-6-28).
Causes
1. Misadjusted center line of image printing.
2. Misadjusted scanner center line.
3. Original placed incorrectly.
Readjust the center line of image printing (see pages 1-6-13 and
14).
Readjust the scanner center line (see page 1-6-37).
Place the original correctly.
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
Check procedures/corrective measures
2AV/X
1-5
1-5-23