Detaching And Refitting The Fixing Heater - Kyocera Mita KM-1530 Service Manual

2AV/X

(4) Detaching and refitting the fixing heater

Follow the procedure below to replace the fixing heater.
Procedure
1. Remove the fixing unit (see page 1-6-48).
2. Detach the fixing heater connector.
3. Remove the screw holding each of the fixing
heater front and rear retainers and then the
retainers.
1-6
4. Pull out the fixing heater from the fixing unit.
5. Replace the fixing heater and refit all the
removed parts.
1-6-50
Connector
Fixing heater
Fixing heater
front retainer
rear retainer
Figure 1-6-73
Figure 1-6-72
Fixing heater
Figure 1-6-74