Kyocera Mita KM-1530 Service Manual page 217

• 15 cpm
Enter maintenance mode.
Enter "065" using the numeric keys.
Press the start key.
Select "2" (auxiliary scanning
direction using the copy exposure
adjustment keys).
Press the interrupt key.
Place an original and press
the start key to make a test copy.
Is the image correct?
Press the stop/clear key to
exit maintenance mode.
Start
G Copy exposure adjustment keys
Setting 1 : Main scanning direction
No
Yes
End
Original Copy
example 1
Figure 1-6-50b
2 : Auxiliary scanning direction
Press the start key.
The new setting
is stored.
For copy example 1, increase the
value using the zoom (+) key.
For copy example 2, decrease the
value using the zoom (–) key.
Setting range: –25 – +25
Initial setting: 0
Changing the value by 1 changes
the magnification by 0.1%.
Increasing the value makes
the image longer, and decreasing it
make the image shorter.
2AV/X
Copy
example 2
1-6-35
1-6