Kyocera Mita KM-1530 Service Manual page 58

Maintenance
item No.
U030 Checking motor operation
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the motor to be operated using the cursor up/down keys.
3. Press the start key. The selected item is displayed in reverse and the operation starts.
Display
MAIN
Tumiki1
Tumiki2
Tumiki3
DUP (F, L)
DUP (F, H)
DUP (R, L)
DUP (R, H)
* Optional.
4. To stop operation, press the stop/clear key.
Completion
Press the stop key after operation stops. The screen for selecting a maintenance item No. is displayed.
U031 Checking switches for paper conveying
Description
Displays the on-off status of each paper detection switch on the paper path.
Purpose
To check if the switches for paper conveying operate correctly.
Method
1. Press the start key. A list of the switches, the on-off status of which can be checked, are displayed.
2. Turn each switch on and off manually to check the status.
When the on-status of a switch is detected, that switch is displayed in reverse.
Display
T2
T3
T4
RES
EJE
DUP1
DUP2
JOB
DUP SF
*Optional.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Operation
Drive motor turns on and developing bias turns on
Drawer drive motor turns on
Drawer drive motor (ST) 1* turns on
Drawer drive motor (ST) 2* turns on
Feedshift motor* rotates forward at low speed
Feedshift motor* rotates forward at high speed
Feedshift motor* rotates in reverse at low speed
Feedshift motor* rotates in reverse at high speed
Switches
Drawer feed switch (DFSW)
Drawer feed switch (ST) 1* (DFSW (ST) 1)
Drawer feed switch (ST) 2* (DFSW (ST) 2)
Registration switch (RSW)
Eject switch (ESW)
Duplex paper conveying switch 1* (DUPPCSW1)
Duplex paper conveying switch 2* (DUPPCSW2)
Job separator eject switch* (JBESW)
Duplex open/close switch* (DUPOCSW)
2AV/X
1-4
1-4-9