Kyocera Mita KM-1530 Service Manual page 221

• 15 cpm
Enter maintenance mode.
Enter "403" using the numeric keys.
Press the start key.
Select the item to be adjusted using
the copy exposure adjustment keys.
Press the interrupt key.
Press the start key
to make a test copy.
Are the margins correct?
Yes
Proceed to another mode?
Press the stop/clear key to
exit maintenance mode.
Start
G Copy exposure adjustment keys
Setting 1 : scanner left margin
Change the setting.
No
Yes
Setting range (default)
No
End
Ejection direction
(reference)
2 : scanner leading edge margin
3 : scanner right margin
4 : scanner trailing edge margin
Press the start key.
The new setting
is stored.
Increasing the value using the zoom
(+) key makes the margin wider.
Decreasing the value using the
zoom (–) key makes the margin
narrower.
Scanner left margin: 0 – +10 (2)
Scanner leading edge margin: 0 – +10 (3)
Scanner right margin: 0 – +10 (2)
Scanner trailing edge margin: 0 – +10 (2)
Changing the value by one moves
the margin by 0.5 mm for all.
Scanner leading edge margin
Scanner
left margin
+2.0
(2 mm)
–1.5
2AV/X
(3 ± 2.5 mm)
Scanner
right margin
+2.0
(2 mm)
–1.5
Scanner trailing edge margin
+2.0
(2 mm)
–1.5
1-6-39
1-6