Kyocera Mita KM-1530 Service Manual page 138

Maintenance
item No.
U255 Setting auto clear time
Description
Sets the time to return to initial settings after copying is complete.
Purpose
To be set according to frequency of use. Set to a comparatively long time for continuous copying at the same
settings, and a comparatively short time for frequent copying at various settings.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the zoom +/– keys.
Description
Auto clear time
The setting can be changed by 30 s per step.
When set to 0, the auto clear function is cancelled.
2. Press the start key. The value is set, and the indication for selecting a maintenance item No. appears.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The indication for
selecting a maintenance item No. appears.
U256 Turning auto preheat/energy saver function on/off
Description
Selects if the auto preheat/energy saver function is turned on. When set to ON, the time to enter preheat/
energy saver mode can be changed in copy management mode.
Purpose
According to user request, to set the preheat time to save energy, or enable copying promptly without the
recovery time from preheat mode.
Method
Press the start key.
Setting
1. Select "on" or "oFF" using the zoom +/– keys.
Display
on
oFF
Initial setting: on
2. Press the start key. The setting is set, and the indication for selecting a maintenance item No. appears.
When the setting is changed from "oFF" to "on", the auto preheat time is set to the initial setting of 15
minutes.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The indication for
selecting a maintenance item No. appears.
Description
Setting range
0 to 270
Description
Auto preheat/energy saver function on
Auto preheat/energy saver function off
2AV/X
Initial setting
90
1-4-89
1-4