Kyocera Mita KM-1530 Service Manual page 82

Maintenance
item No.
U211
Completion
Press the stop/clear key at the screen for selectiong an item. The screen for selectiong a maintenance item
No. is displayed.
U240 Checking the operation of finisher motors and solenoids
Description
Turns the motors and solenoids in the optional finisher on.
Purpose
To check the operation of the finisher motors and solenoids.
Method
1. Press the start key. The screen for selecting an item is displaued.
2. Select the item to be operated using the cursor up/down keys.
The selected item is displayed in reverse.
Display
INITIAL
FJM
RJM
RETM
STAPLER
PUSOL
3. Press the start key. The operation starts.
Completion
Press the stop/clear key when operation stops. The screen for selecting a maintenance item No. is
displayed.
U241 Checking the finisher switches
Description
Displayes the status of respective switches and sensors in the optional finisher.
Purpose
To check if respective switches and sensors in the optional finisher.
Method
1. Press the start key. The screen for selecting an item is displaued.
2. Select the item to be operated using the cursor up/down keys.
Display
MSFSW
LSFSW
FTPS
FJHS
RJHS
REHS
STP
3. Press the start key.
Completion
Press the stop/clear key when operation stops. The screen for selecting a maintenance item No. is
displayed.
Description
Motors and solenoids
Initial operation
Front side registration motor (FSRM)
Rear side registration motor (RSRM)
Trailing edge registration motor (TERM)
Stapler motor (STM)
Pick up solenoid (PUSOL)
Switches and sensors
Tray open/close switch (TOCSW)
Left cover switch (LCSW)
Internal tray sensor (ITS)
Side registration front home position sensor (SRFHPS)
Side registration rear home position sensor (SRRHPS)
Trailing edge registration home position sensor (TERHPS)
Stapler empty sensor (STES)
2AV/X
1-4
1-4-33