Kyocera Mita KM-1530 Service Manual page 65

2AV/X
Maintenance
item No.
U072
Adjustment
1. In interrupt copy mode, make a copy using the DF.
2. Check the copy image and adjust the center line as follows.
For copy example 1, increase the setting.
For copy example 2, decrease the setting.
1-4
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U073 Checking scanner operation
Description
Simulates the scanner operation under arbitrary conditions.
Purpose
To check scanner operation.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be changed using the cursor up/down keys. The selected item is displayed in reverse.
3. Change the setting using the cursor left/right keys.
Display
ZOOM
SIZE
LAMP
Paper sizes for each setting in SIZE
4. Press the start key. Scanning starts under the selected conditions.
5. To stop operation, press the stop/clear key.
Completion
Press the stop/clear key when scanning stops. The screen for selecting a maintenance item No. is
displayed.
1-4-16
Reference
Original
Operating conditions
Magnification
Paper size
On and off of the exposure lamp
Setting Paper size
8 A4
B5
9
11" × 8
1
/ "
24
2
A3
36
B4
39
A4R
40
B5R
41
Description
Copy Copy
example 1 example 2
Figure 1-4-3
Setting range
50 to 200%
See below.
0 (off) or 1 (on)
Setting Paper size
42 A5R
Folio
47
11" × 17"
52
11" × 15"
53
" × 14"
1
8 /
55 2
" × 11"
1
8 /
2
56
" × 8
1 1
5 / / "
2 2
58