Shutting Down The Dishwasher; Care And Maintenance; Care, General - Meiko FV 28 G-M Operating Instructions Manual

Operating instructions EcoStar 545 D-M
Program start key
ATTENTION!
Datei:BA_EcoStar545D-M_9662798_EN_2009-05.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
8.5.1 Start the wash cycle

Pre-wash the dishware (major food residues, serviettes, tooth picks, etc.) and
place in the basket.

Place the basket in the appliance, ensuring that it is correctly centred.

Close the hood.

Press the program start key or press down the hood rod.
The appliance washes and rinses automatically and switches off the wash program after
completion. The program cycle is indicated by a light on the program start key.
The wash time can differ from the set program time if the boiler heating capacity is not
sufficient for heating up the fresh water to the pre-set boiler temperature during the
program time. In this case, the automatic wash time extension is activated.
8.5.2 Remove the cleaned items
 When the light goes out, open the hood and remove the basket.
In case of Airbox AktivAir
After the wash is finished the extraction fan is switched on for three minutes.
The steam coming from the tank partially condensates and goes back into the tank. The
rest mixes into the air so that steam formation is minimised
9

Shutting down the dishwasher


Press the OFF-key. The machine is switched off when all the lights are out.

Remove the stand-pipe.
Machines without built-in drain pump:

After the water has been drained from the tank, the tank is sprayed with clean hot
water by pressing the Program Start button. The hood must remain closed.
Machines with built-in drain pump:

Press the program start key to drain the tank.

The tank interior is sprayed with clean hot water after the tank water has been
drained. The hood must remain closed. The waste water pump switches off auto-
matically.
10

Care and maintenance

10.1 Care, general

The appliance has been designed to minimise the need for cleaning, care and mainte-
nance.
However, for a reliable, safe and permanent function of the appliance and in the inter-
est of hygiene and cleanliness a correct care and maintenance is necessary.
To facilitate this procedure, a maintenance contract can be concluded with the manu-
facturer or the manufacturer's agent.
Works/repairs which were not correctly executed and the use of unauthorised parts by
unqualified personnel endanger both operators and the appliance, and will invalidate
the warranty.
W e reserv e the right to change execution and construction!
17/44
9662798