2.5.2 Disconnecting the projector from AC
Power down the projector and wait for the internal cooling fans to stop before turning the main power switch
on the electronics module OFF. This allows the lamps enough time to cool. Unplug the line cord from the wall
outlet.
Refer to
Section 7 Specifications
unplugging the projector.
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
for complete details on all power requirements for the projector.
Wait for the cooling fans to stop before turning the main power switch OFF and
Section 2: Installation and Setup
2-21