Power Cord And Attachments; Ventilation; Servicing - Christie RPMX-D132U User Manual

5.1.5 Power Cord and Attachments

Use only the attachment accessories recommended by CHRISTIE. Use of others may result in the risk of fire,
shock or personal injury.
specified voltage and power range. See Section 7.
• Do not place items on the power cord. Place the projector where the cord cannot be walked on or have
objects rolling over it.
• Operate the projector only at the specified voltage. Do not overload power outlets and extension cords as this
can result in fire or shock hazards.
• The projector is equipped with a three-wire grounding plug. If you are unable to insert the plug into an outlet
contact an electrician to replace the outlet. Do not defeat the safety purpose of this grounding-type plug.

5.1.6 Ventilation

Slots and vents in the projector provide ventilation for reliable operation and prevent overheating. Do not
block or cover these openings.
• Do not place the projector over a radiator or heat register.
• Do not place the projector in an enclosure without proper ventilation.
• Do not "poke" objects into the ventilation openings of the projector. They may touch dangerous voltages or
short-out components resulting in a fire or shock hazard.
• Do not spill liquids into the projector. If a spill occurs, unplug the projector immediately and have it serviced
by a
CHRISTIE accredited service technician

5.1.7 Servicing

If any of these conditions exist, immediately unplug the projector from the power outlet and ask a qualified
service technician to look at it.
• The power cord is damaged.
• The internal cooling fans do not turn on when the projector is first powered up.
• Liquid is spilled into the projector.
• The projector is exposed to excessive moisture.
• The projector is not operating normally or its performance has significantly deteriorated in a short period of
time.
• The projector is dropped or the shipping case (if applicable) is badly damaged.
accredited service technicians.
Only use replacement parts that are manufacturer-approved. Using parts not specified by the
manufacturer can result in fire, electric shock or risk of personal injury and irreparable equipment
damage.
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
Use only the AC power cord supplied. Do not operate if the AC supply exceeds the
Do not service the projector yourself. All servicing must be performed by CHRISTIE
.
Section 5: Maintenance
5-3