4: Advanced Configuration And Controls; Language; Image Orientation; Fade Time - Christie RPMX-D132U User Manual

4 Advanced Configuration and Controls
The Configuration menu provides access to diagnostics and calibration tools and the Service submenu
(password-protected). Use the Configuration menu to define general operating parameters and communica-
tions with other projectors and equipment, and to access other advanced processing and image adjustments
affecting overall performance.
Settings in the Configuration menu (and its submenus) are typically "global" settings applied regardless of the
type of source you are using. This characteristic is identified with the
The Configuration menu is recommended for experienced users/technicians only.
NOTE:
4.1

Language

Choose from available languages to use in the projector's menus. The change will take effect immediately.
4.2

Image Orientation

Set the orientation of the image according to the orientation of your projector. If the setting is incorrect,
projected images will be reversed and/or upside down.
4.3

Fade Time

Set how long (in seconds) it takes to gradually dissolve one image into another for a source switch. Applies to
seamless switching, PIP is disabled.
4.4

Auto Power-up

Enter a checkmark to enable the projector to automatically power up after losing power due to a power failure
or due to unplugging the projector during operation. Note that unsaved display adjustments may be lost.
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
F 4-1 C
IGURE ONFIGURATION
(globe) icon alongside the option.
M
ENU
4-1