Inputs - Christie RPMX-D132U User Manual

Section 7: Specifications
7.2

Inputs

Applies to RPMX/RPMSP-D132U and RPMSP-D180U
ANALOG RGB OR YPRPB
Pixel Clock Rate
Color Space
Input Levels:
SYNC
Horizontal Frequency Range
Vertical Frequency Range
Sync Type
Polarity
Input Levels
DC Operating Range
Nominal Impedance
Horizontal Sync Duty Cycle3%
min, 20% max
NOTES: 1)Value specifies frame rate of non-interlaced sources and field rate for interlaced sources. Frame/
field rates higher than the maximum refresh rate of the panels will be displayed at a lower rate.
2) Does not apply to sync-on-green/luma.
3) As the horizontal frequency increases and/or as the vertical scaling ratio of input lines to output lines
increases many sources will run into the internal 180Mpix/s processing which limits the number of pixels that
can be processed.
7-2
1,3
2
2
2
2
(Interlaced or Progressive Scan Format)
13 – 210 MHz max
RGB or YPbPr
R, G, B, - with sync:
R, G, B, - without sync:
Pb, Pr
DC Offset
Nominal Impedance
(Interlaced or Progressive Scan Format)
15 – 120 kHz
23.97 – 150 Hz
Separate H and V
Composite (bi-level, tri-level, XOR)
Sync-On-Green/luma (bi-level, tri-level)
Serrations and/or Equalization pulses
MarcoVision™ compatible
Positive or Negative
0.5V – 4.0V
pp pp
±3V
75 ohms
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
±2dB
1.0V
p-p
±2dB
0.7V
p-p
±2dB
0.7
p-p
±2V
75 ohms
020-100245-03 Rev. 1 (11-2010)