Table of Contents
Advertisement
YPbPr signals
Connect a YPbPr signal (component video) to
NOTES: 1) If the projector fails to recognize a YPbPr signal, specify the Color Space option within the Image
Settings menu. See
DVI Digital Video
Use the DVI-I connector at
cable with DVI-I connectors at both ends to connect devices that transmit digital and analog video signals such
as high-quality DVD players, satellite receiver and digital cable TVs.
NOTES: 1) To make sure of true digital output from devices that transmit digital signals, connect to the DVI-I
connector.
2) DVI loop through is not available unless you have the optional DVI Input Module installed at Input 5.
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
F
IGURE
3.5 Adjusting the
Image.
F
2-13 C
IGURE
to connect either analog or digital video devices to the projector. Use a
INPUT 2
2-12 C
RGB
ONNECTING
or
as shown in figure 2.14.
INPUT 1
INPUT 2
YP
P
ONNECTING
B
R
Section 2: Installation and Setup
2-13
- Quick Links:
- Key Features
Hide quick links:
Advertisement
Table of Contents
