Determining The On-Screen Display Position; Changing The Language; Resuming Projector Operation After An Ac Power Interruption; Enabling Projector Communication - Christie BOXER 30 User Manual

Determining the on-screen display position

Choose one of the pre-defined locations for the display of the on-screen menus.
1. Select MENU > System Settings > Menu Preferences > OSD Position.
2. Select the location on the screen where you want the on-screen display menus to appear.
3. Select Enter.

Changing the language

Choose the language you want displayed on projector side panel display and on-screen display.
1. Select MENU > Languages.
2. Select Enter.
3. Select the appropriate language and select Enter.
The change takes effect immediately.
Resuming projector operation after an AC power
interruption
If an AC power interruption occurs while Auto Power Up is enabled, the projector will resume operation
in the same state it was prior to the loss of power.
1. Select MENU > System Settings > Power Settings.
2. Select Auto Power Up.
3. To enable automatically powering up the projector after an AC interruption, select Enter.

Enabling projector communication

Enable the receivers and the wired keypad to communicate with the projector from the remote.
The front and rear IR sensors receive transmissions from the IR remote. Keep the transmission path to
these sensors unobstructed for uninterrupted communications with the projector.
Alternatively, you can connect a wired version of the remote to the connector on the IMXB labeled
Wired Keypad.
1. Select MENU > Communications > Projector Communications.
2. To assign the projector an ID, select Projector ID.
3. Use the up and down keys to enter the projector ID.
4. Select Enter.
5. To enable the front IR sensor, select Front IR Enabled and select Enter.
6. To enable the rear IR sensor, select Rear IR Enabled and select Enter.
7. To enable a wired version of the remote, select Wired Keypad Enabled and select Enter.
By default this feature is enabled.
Boxer 30 (Bb.2) User Manual
020-102016-02 Rev. 1 (02-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Configuring system settings
27