Edge Blending Procedure - Christie RPMX-D132U User Manual

Other Functions
For convenience, the Edge Blending submenu also includes related options for enabling a specific color and/or
test pattern, or for working with colors or the lamp. Such functions duplicate those provided elsewhere in the
menu system.

4.15.1 Edge Blending Procedure

Before working with edge blending software functions, you must:
• Physically align the projectors/images by correctly overlapping the displays from your intended external
source
• Match colors and Brightness Uniformity.
IMPORTANT:
BOTH projectors.
1. Start with 2 projectors. Display full white field test pattern from both.
2. In the Edge Blending submenu, enter a checkmark in the top checkbox to enable Edge Blending
3. Set Starting points for adjustment.
a. Set all blend widths to 0.
b. Go to "More" and set everything in the Edge Blending (2) menu to 50.
4. Set Blend Width. On one projector, increase the Blend Width for an overlapping edge. For example, if the
projector's image is on left, its right edge overlaps the adjacent image—adjust Right Blend Width. Use the
same setting on the second projector for this shared edge.
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
F 4-27 "M
IGURE
For a shared edge, all Blend procedures and settings must be identical on
F 4-28 S S
IGURE ET TARTING
Section 4: Advanced Configuration and Controls
" E
IDPOINT XAMPLES
P E P
OINTS FOR ACH ROJECTOR
4-29