Christie RPMX-D132U User Manual page 77

The projector can utilize any of the 3 pre-defined color performance settings identified in Figure 3.42
(default=User 1), or colors can be driven on the basis of color temperature. For most applications, one of these
options will produce accurate and realistic colors from a variety of sources. They can be applied at any time in
the Advanced Image Settings menu ("Select Color Adjustment"), and are not adjustable.
Defining "User" Color Gamuts
You may find that none of the pre-defined "Select Color Adjustment" options suit your needs. For example,
you may require a unique color gamut (range) for a single projector or to precisely match colors across
multiple adjacent displays.
Use either the Color Adjustments by X,Y or Color Saturation submenu to define the precise hue of each
primary color component (red, green, blue, and white). You can create up to four custom color gamuts (User 1,
2, 3, or 4) defined by these adjustments.
The 2 menus differ only in their user interface, use the one best suited to your needs and application:
• Color Adjustments by X,Y — Enter known x/y coordinates from the chromaticity graph. For best results,
use with a color meter.
• Color Saturation — Adjust color slidebars and judge image color by eye. A color meter can also be used.
A user-defined color "adjustment" can be applied by selecting it in the Advanced Image Settings menu ("Select
Color Adjustment").
Defining a "User" color gamut when a test pattern is displayed does not get saved in the current
NOTE:
channel. Display the source first then select a color gamut (User) from Select Color Adjustment. Changes here
are then saved for that source in channel memory.
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
F 4-10 C P
IGURE OLOR ERFORMANCE
F 4-11 C
IGURE USTOMIZE
Section 4: Advanced Configuration and Controls
C
HOICES
C H
OLOR UE
4-9