Pip And Seamless Switching - Christie RPMX-D132U User Manual

Section 4: Advanced Configuration and Controls
FAILED TO STRIKE
TURNED OFF UNEXPECTEDLY
COOLING FAN FAILED
OPERATION ERROR

4.11 PIP and Seamless Switching

PIP (Picture-in-Picture) and Seamless Switching are independent but related projector features that utilize two
image-processing paths within the projector.
PIP, double processing allows you to display two different images simultaneously, typically a smaller
"secondary" image within a large "primary" background.
In a seamless switch, the double processing occurs between displays so that a full image relayed from one
source can smoothly transform into a full image from another source. This change can be virtually
instantaneous, or slowed so that the current image appears to dissolve or "fade" into the new image.
Options for enabling and controlling PIP and Seamless Switching reside in the same menu. Since both features
utilize the projector's double processing capability, PIP and Seamless Switching cannot be used together. For
example, fading a pair of PIP images into a new display from a different source is not possible.
For best PIP or Seamless Switching results, use two different signal types as defined in
not mix two signals of the same type.
Table 4.1
SIGNAL TYPE
#1
#2
4-16
Displays when the projector can not turn a lamp on. This may or may not be lamp
related, and may require further investigation by the user before proper servicing can
take place. For example, a lamp driver may have failed causing the lamp not to ignite.
Displays when a lamp or lamp related component fails. This error may be caused by a
hot lamp, a failed lamp or a lamp driver that has failed.
Displays when one of the lamp cooling fans stop unexpectedly.
Displays when a lamp fails to move into the required position to operate properly.
F 4-18 M
IGURE ORE
DESCRIPTION (INPUT LOCATION)
5 BNCs (RGBHV or YPbPr)
DVI - I (analog or digital)
L O
AMP PTIONS
RPMSP-D132U & RPMSP-D180U User Manual User Manual
Section Table 4.1 . Do
020-100245-03 Rev. 1 (11-2010)