D Optional Input Modules; Rgb500 Input Module 38-804606-Xx; Rgb400Ba Input Module 38-804610-Xx - Christie RPMX-D132U User Manual

D Optional Input Modules

There are many optional input modules and accessories currently available for this projector. Contact your
dealer for a complete and up-to-date listing.
NOTE: Always unplug the projector or switcher before installing or removing any optional input module.
D.1 RGB500 Input Module 38-804606-xx
The RGB500 Input Module may be installed in this projector, a Marquee Signal Switcher, or a Marquee Case/
Power Supply. The module receives analog RGB input signals from computers or other RGB source devices.
RGB500 Features
• accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync),
up to 500 MHz bandwidth
• BNC connectors for RGB signal inputs
NOTE: The audio connectors are not functional.
D.2 RGB400BA Input Module 38-804610-xx
The RGB400 Buffered Amplifier Input Module may be installed in this projector, in a Marquee Signal Switcher
or in a Marquee Case/Power Supply. Connect three-, four-, or five-wire RGB video signals of up to 400 MHz
bandwidth, signals typically produced by high-resolution computer or workstations. The buffering capability
of the module enables the incoming signal to be sent to a remote destination. Inputs are 75Ω terminated.
RGB400BA Features
‡accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or separate horizontal and vertical sync)
‡BNC connectors for RGB signal inputs
‡Buffered signals to a remote destination
NOTE: The audio connectors are not functional.
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
D-1