Lamps And Mechanical Lamp Changer; Electronics Module (Em) - Christie RPMX-D132U User Manual

Section 3: Operation

3.1.3 Lamps and Mechanical Lamp Changer

Integrated with the PHM is the lamp module, which holds two identical 132W or 180W (UHP) lamps. The
built-in mechanical lamp changer automatically switches lamps in the event a lamp fails. The non-operating
lamp can be replaced while the projector is powered on.
You can also request a lamp switch to occur by selecting the other lamp mode from the lamp menu
4.10.1) or by pressing the illuminated L
made, the current operating lamp will turn off and the mechanical lamp changer will move to the selected lamp
position before the projector attempts to ignite the lamp.

3.1.4 Electronics Module (EM)

The EM contains the video processing electronics and input connectors of the projector.
Input Panel
All source connections are made to the main input panel. Use:
• to connect RGB and YPbPr sources
INPUT1
• for analog or digital display signals
INPUT 2
• for composite video
INPUT 3
• to connect S-video.
INPUT 4
• to install one of the available optional input modules. Refer to
INPUT 5
for a list of modules.
For more details on connecting sources, refer to 2.4 Connecting Sources.
Status Display
Located just above the main power switch is a two-digit status display window that displays the current status
of the projector. If the projector encounters an error during operation, an error code number will display.
During normal operation "On" appears in the window.
Status LED
Located next to the 2-digit status display is a LED that conveys the current status of the system. Refer to Table
3.2 for a description of Status lights. Press
LED STATUS
S
OLID YELLOW
S
OLID GREEN
S R
OLID ED
3-2
C
AMP ONTROL
Exit to acknowledge and clear errors.
Table 3.1 Table 3.2. Error LED Status



button near the lamp module. When this selection is
Appendix D Optional Input Modules
DESCRIPTION
Projector powering down/powering up
Projector powering on/cooling down
System error – see corresponding error
code on status display
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
(Section
020-100245-03 Rev. 1 (11-2010)