Brightness Uniformity - Submenu; Edge Blending - Submenu - Christie RPMX-D132U User Manual

Professional quality xga and sxga+ data projectors

Table of Contents

Section 4: Advanced Configuration and Controls

4.8.3 Brightness Uniformity

Provides refinement of displays already matched for their primary colors and overall light output. Use to create

a smooth image in which no area appears brighter or more red, green or blue than another.

Enable the "Uniformity Enable" checkbox to access a multitude of adjustments for critical color light output

control in specific areas throughout the image. Your settings apply as long as the "Uniformity Enable"

checkbox is enabled and you are using a "User" color temperature defined by the Brightness Uniformity

controls. Remove the checkmark to disable the Brightness Uniformity function.

See

Section 4.13 Using Multiple Projectors

NOTE:

uniform brightness in adjacent displays.

4.8.4 Edge Blending

Provides a range of controls for smoothing the overlapping bright edges of multiple adjacent projected images

to create a single "seamless" image.

adjustment.

4.8.5 Color Adjustments by X/Y, and Color Saturation —

For defining or changing a User 1, 2, 3, or 4 color performance or "gamut". Sometimes known as

NOTES: 1)

Comprehensive Color Adjustment™.

performs the same way from projector-to-projector. This can be altered only in the Service menu. To recover

factory

settings,

Defaults".

4-8

— Submenu

4-8 B

IGURE

— SUBMENU

NOTE:

IGURE

Factory-measured primary color levels make sure a specific color

go to the Service menu Color Primary Settings submenu (password-protected. Select "Factory

RIGHTNESS

NIFORMITY

for the complete step-by-step procedure for achieving

Table of Contents

Rpmsp-d132u Rpmsp-d180u