Changing The Language; Changing The Temperature Units; Resuming Projector Operation After An Ac Power Interruption; Keeping Electronics On In Standby Mode - Christie Mirage HD25 User Manual

2. Select the location on the screen where you want the on-screen display menus to appear.
3. Select Enter.

Changing the language

Choose the language you want displayed on projector display panel and on-screen display.
1. Select MENU > Languages.
You can also select the language from MENU > System Settings > Menu Preferences >
Languages.
2. Select Enter.
3. Select the appropriate language and select Enter.
The change takes effect immediately.

Changing the temperature units

Set if the temperature is measured in Celsius or Fahrenheit.
1. Select MENU > System Settings > Menu Preferences > Temperature Units.
2. Select the temperature unit: Celsius or Fahrenheit.
3. Select Enter.
Resuming projector operation after an AC power
interruption
If an AC power interruption occurs while Auto Power Up is enabled, the projector will resume operation
in the same state it was prior to the loss of power.
1. Select MENU > System Settings > Power Settings.
2. Select Auto Power Up.
3. To enable automatically powering up the projector after an AC interruption, select Enter.

Keeping electronics on in standby mode

When the projector is placed in standby mode, the light source will be turned off but the electronics
will remain on.
1. Select MENU > System Settings > Power Settings.
2. Select Keep Electronics On In Standby.
3. To enable electronics remaining on in standby mode, select Enter.
Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25
020-102649-01 Rev. 1 (04-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Configuring system settings
36