Christie RPMX-D132U User Manual page 46

Section 3: Operation
Using Slidebars and Other Controls
Most function menus allow you to change settings by using slidebars, checkboxes, and drop-down lists. To
select a slidebar, toggle a checkbox status or view a drop-down list, do one of the following within the function
menu:
• Enter the menu option number corresponding to the setting you wish to change (for example, press
to select Vertical Stretch in the Size & Position menu).
• Move the highlight to the option and press
• Move the highlight to the option and press
• Bypass the menus entirely and use a single key to immediately access an adjustment during your presenta-
tion
NOTE: Applies only to options having their own key, such as Contrast, Brightness, Gamma, etc.
• For "blind" access, hide the entire menu system (see OSD key, above) and/or direct slidebars activated by
their own key (such as Contrast, Brightness, etc.). Control by using the proper key press or numerical
sequence of key presses.
Once selected, change the setting and press
Slidebars in menus –
window). This number expresses a percentage or units (such as pixels, degrees Kelvin), depending on the
option. Press
accordingly. Hold for continuous adjustment or press
the keypad. Press
"Direct" slidebars -
menu system. For example, press
Contrast option in the Image Settings menu.
NOTES: 1) A direct slidebar can still be adjusted if the display is turned off (see
menu) — the slidebar will not be visible.
2) A direct slidebar disappears if it is not used within 5 seconds.
Checkboxes - Conditions are enabled when the adjacent checkbox contains a checkmark. To toggle the
checkbox, highlight and press
numbered, enter its number to immediately toggle the checkbox.
Drop-down lists –
and press (Enter) or enter the menu option number.
3-12
F 3-6 E
IGURE
The current value for a given parameter appears to the left of its slidebar (adjustment
to adjust the setting up or down. Both the number and the length of the bar change
Exit
to save or press
For quick access to Gamma, Brightness, and Contrast slidebars without traveling the
Cont
to immediately display the same contrast slidebar accessed with the
F 3-7 E
IGURE
, or highlight and use
Parameters labeled with a have a drop-down list. To see the drop-down list, highlight it
(Enter).
to adjust immediately.
to save and return to the current function menu.
S
XAMPLE OF LIDEBAR
to activate a slidebar text box for number entry via
to cancel.
C
XAMPLE OF HECKBOX
to check and
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
1
OSD or Menu Preferences
to uncheck. If a checkbox is
020-100245-03 Rev. 1 (11-2010)
3