Christie RPMX-D132U User Manual page 93

c. Select the 13 Point test pattern for display. This pattern provides 9 screen "zones" with 13 targets.
FOR BEST RESULTS: Rather than examining the CENTER of each zone when assessing Brightness Uniformity
adjustments, focus on extreme EDGES as indicated in the illustration at right.
d. In either Color Adjustment menu, select a "User" color. Then:
• If you have adjusted "User 1" Color Adjustment to create a well-matched wall (recommended), select
"User 1" and then choose a color. Continue with Step
• If you prefer maximum brightness rather than a particular color temperature, select "Max Drives".
e. In the White Uniformity menu, set "Overall" to 50.0 and set all others to 0. This decreases the light
output from each color just enough throughout the screen so that any color level can then be increased
later as necessary for matching light output from zone-to-zone. Do not exceed 50.0 for "Overall"—a
higher level will likely interfere with achieving brightness uniformity and is not recommended.
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
IMPORTANT
Do not change User 1 Color Adjustments
in color-matched applications!
Section 4: Advanced Configuration and Controls
.
1e
4-25