Christie RPMX-D132U User Manual page 87

Tips:
• Make sure a channel is configured for each source.
• Progressive digital and analog sources are recommended.
• Set Image Optimization to Seamless Switching (see below).
• For best results, use the same frame rate and gamma setting for each.
Avoid using two Interlaced sources.
NOTE:
Image Optimization
Use this setting to choose what is more important, image quality or switching between sources. Selecting Best
Image Quality will make sure the image is proper, but when switching sources, the screen will go blank
increasing your switching time. Smooth Switching allows for a cleaner transition between sources. The image
will fade from one image to another according to the Fade Time control. Seamless Switching overrides the
Frame Lock Enable settings and forces the output to run at 60Hz regardless of the input signal. Image is 100%
seamless when switching sources.
Disable PIP and Best Switching for Interlaced sources > 35kHz.
NOTE:
Fade Time
Set how long (in seconds) it takes to gradually dissolve one image into another for a source switch when Image
Optimization is set to Smooth Switching.
PIP must be disabled for Fade Time to take effect. Also, the PIP window must be closed to activate it.
NOTE:
Numbers Select Main Image
Use Numbers Select Main Image to use the numeric keys #1-8 as input keys. This remapping of the keypad
(see right) can be particularly useful with PIP displays, providing a convenient shortcut for changing the
primary (background) image without first having to return to the Main menu. Select "Always" to use the keys
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
Section 4: Advanced Configuration and Controls
4-19