Broadcast Key; Front Ir Protocol - Christie RPMX-D132U User Manual

Section 4: Advanced Configuration and Controls
ARTNET BASE CHANNEL
DEVICE NAME
DEVICE DESCRIPTION

4.7.5 Broadcast Key

Enter a checkmark for keypad commands sent to any one projector to be relayed to all projectors in a serial
Proj
network. The
specific projector when necessary. Remove the Broadcast Key checkmark when operating redundant networks.

4.7.6 Front IR Protocol

This option cannot be disabled. Select "Any", to enable the projector. Use this option to select a keypad or
select a specific protocol for use with the keypad. There are up to 8 protocols that can be selected. This
prevents a keypad from one projector interfering with another.
4-6
When advanced mode is enabled, the projector listens to data on 64 consecutive channels or
10 consecutive channels when not enabled. The projector processes requests beginning with
the 'base channel' defined here. The requests implement these functions:
DMX FUNCTION
CHANNEL
Base Shutter
Base +1 Slider Lock
Base +2 Input*
Base +3 Channel *
Base +4 Lens-vertical *+
Base +5 Lens-horizontal *
Base +6 Lens – Focus * +
Base +7 Lens- Zoom * +
Base +8 Power *
Base +9 None
* Functions are only active when the Slider Lock is set to Unlocked
NOTE: Make sure the channels DO NOT overlap another device. Example:
GOOD
Proj1_Base = 0
Proj2_Base = 10
Proj3_Base = 20
Used to name each device; some ArtNet servers support querying for devices.
More information that is returned when a "device query" is done.
key will temporarily "override" the effect of a broadcast setting and allow you to control a
VALUE
Open (0-64), No Action (65-192), Closed (193-255)
Locked (0-254), Unlocked *(255)
Input # (1-8)
Channel #(1-99)
Lens down(0), Stop(1-124), Lens Up(255)
Lens Right(0), Stop(1-254), Lens Left(255)
+
Negative Focus(0), Stop(1-254), Positive Focus(255)
Zoom Out(0), Stop (1-254), Zoom In (255)
Power Off(0), No Action(1-254), Power On(255)
BAD
Proj1_Base = 5
Proj2_Base = 9
Proj3_Base = 11
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)