Image Settings Menu - Christie RPMX-D132U User Manual

When using SD or HD or a decoded video source at
active input window of 720 x 483.
Blanking (Top, Bottom, Left, and Right)
Crop the image so that unwanted edges are removed from the display (changed to black). Blanking defines the
size of the Active Input Window, or area of interest. Range of adjustment depends on the source resolution and
other factors.
Plug & Display (EDID)
By default, a Plug & Play (EDID) source outputs a signal according to the EDID (Extended Display Identifica-
tion Data) information provided by the projector. To override this information and display in a different format
(for example, if your Plug & Play [EDID] device does not support the projector's resolution or frequency),
select the Plug & Play (EDID) resolution from the list.
Any daisy-chained projectors will also display according to the chosen Plug & Play (EDID) format.
3.7

Image Settings Menu

Use options in the Image Settings menu to alter your image without affecting its size or position. Changes
made are applied immediately and are saved when you exit the menu (press
Options not available for the projector model or source are disabled and appear dim (gray).
RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
F 3-21 B
IGURE
F 3-22 P & D
IGURE LUG ISPLAY
or , the default blanking of "0" defines an
INPUT 3 INPUT 4
LANKING
S O
OURCE UTPUTS
Section 3: Operation
Exit
or Menu ).
3-25