Adjust the hue of each primary color (red, green, blue, and white) by using more or less of it in relation to the
other colors.
See
4.13 Using Multiple Projectors
4.9
Diagnostics / Calibration
4.9.1 Test Pattern
Choose the desired internal test pattern to display or select OFF to turn off a test pattern. Use the
cycling through test patterns.
4.9.2 Gray Level
Set the desired level of gray for displaying in the full gray field test pattern.
4.9.3 Freeze Image
Enter a check mark to stop an image on a single frame. Use this diagnostic tool to examine in detail a still
version of an incoming image that cannot be "frozen" at the source. For example, in moving images it is
sometimes difficult to observe artifacts such as external deinterlacing/resizing and signal noise. Remove the
checkmark to return back to normal.
RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
F
4-13 C
IGURE
for Using Color Saturation procedure.
F
4-14 D
IGURE
IAGNOSTICS AND
Section 4: Advanced Configuration and Controls
C
USTOMIZE
OLOR
C
S
ALIBRATION
UBMENU
Test
key for
4-11