Table of Contents
Advertisement
1.4
MECHANICAL SPECIFICATIONS
The following table and figure show overall dimensions of the Vanguard 3000 for fixed and mobile models. (Both
models have the same dimensions and differ only slightly in appearance: the fixed model has only two antenna
connectors in the front of the unit, where the mobile model has four.) Dimensioned drawings of units with mounting
brackets are provided in APPENDIX B. The drawings and associated data may be used for layout reference, but it is
advised that a physical comparison be made to the modem and bracket before laying out and drilling mounting holes.
Table 1 Vanguard 3000 chassis overall dimensions
Dimension
Inches
Height
1.90
Width
6.00
Depth
4.50 ± 0.04
(Overall)
Depth
4.28
(Chassis only)
Figure 4 Side tapped mounting hole location detail — typical
both sides.
#8-32 UNC – 2B thread × 0.30 in. (0,76 cm) depth
2 holes for mounting both sides (4 holes total).
Centimeters
4,83
15,2
11,4 ± 0,1
10,9
Figure 5 Base tapped mounting hole location detail — bottom of chassis only.
Vanguard 3000 Series Multicarrier Cellular Data Modem & IP Router PN 001-7300-100 Rev. B
Figure 3 Vanguard 3000 chassis overall dimensions
#6-32 UNC – 2B thread × 0.12 in. (0,30 cm) depth
4 holes for base mounting (bottom surface only).
| Page 3
Advertisement
Table of Contents
