Table of Contents
Advertisement
1.4
MECHANICAL SPECIFICATIONS
The following table and figure show overall dimensions of the Vanguard router for fixed and mobile models. (Both
models have the same dimensions and differ only slightly in appearance: the fixed model has only two antenna
connectors in the front of the unit, where the mobile model has four.) Dimensioned drawings of units with mounting
brackets are provided in 0. The drawings and associated data may be used for layout reference, but it is advised that a
physical comparison be made to the modem and bracket before laying out and drilling mounting holes.
Table 1: Vanguard router chassis overall dimensions
Dimension
Inches
Height
1.90
Width
6.00
Depth
4.50 ± 0.04
(Overall)
Depth
(Chassis
4.28
only)
Figure 4: Side tapped mounting hole location detail —
typical both sides.
#8-32 UNC – 2B thread × 0.30 in. (0,76 cm)
depth
2 holes for mounting both sides (4 holes total).
Centimeters
Figure 3: Vanguard router chassis overall dimensions. Same mounting holes (not shown)
dimension as on bottom side of Chassis.
4,83
15,2
11,4 ± 0,1
10,9
Figure 5: Base tapped mounting hole location detail — bottom of chassis. Same dimension on
top side of Chassis.
#6-32 UNC – 2B thread × 0.12 in. (0,30 cm) depth
4 holes for base mounting.
Vanguard 3000 Multicarrier Cellular Data Modem & IP Router PN 134732-VG3000 Rev. D| Page 4
Advertisement
Table of Contents
