Authentication Server; Configuring Local User Database; Figure 6-6 802.1X Authentication; Table 6-3 802.1X Authentication - ZyXEL Communications ZyWALL 5 User Manual

The following table describes the labels in this screen.
LABEL
Authentication Select Authentication Required, No Access or No Authentication Required from the
Type drop-down list box.
Select Authentication Required to authenticate all wireless stations before they can
access the wired network.
Select No Authentication Required to allow all wireless stations to access your wired
network without authentication.
Select No Access to deny all wireless stations access to your wired network.
Reauthentication Specify the time interval between the RADIUS server's authentication checks of wireless
Period users connected to the network.
This field is active only when you select Authentication Required in the Authentication
Type field.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.

6.11 Authentication Server

A ZyWALL set to be a VPN extended authentication server can use either the local user database
internal to the ZyWALL or an external RADIUS server for an unlimited number of users. The
ZyWALL uses the same local user database for VPN extended authentication and wireless LAN
security.

6.12 Configuring Local User Database

To change your ZyWALL's local user list, click AUTH SERVER. The Local User Database screen
appears as shown.
Wireless LAN and Authentication Server

Figure 6-6 802.1X Authentication

Table 6-3 802.1X Authentication

DESCRIPTION
ZyWALL 5 Internet Security Appliance
6-9