The following table contains instructions about the new fields when you choose PPTP in the
Encapsulation field in menu 4.
FIELD
Encapsulation
Press [SPACE BAR] and then press [ENTER] to choose PPTP. The
encapsulation method influences your choices for the IP Address field.
Idle Timeout
This value specifies the time, in seconds, that elapses before the ZyWALL
automatically disconnects from the PPTP server.
26.4 Configuring the PPPoE Client
If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE, please
see the appendix.
The following table contains instructions about the new fields when you choose PPPoE in the
Encapsulation field in menu 4.
LAN Setup
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 26-2 Internet Access Setup (PPTP)
Table 26-2 New Fields in Menu 4 (PPTP) Screen
DESCRIPTION
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 26-3 Internet Access Setup (PPPoE)
ZyWALL 5 Internet Security Appliance
EXAMPLE
PPTP
100
(default)
26-3