18.13 Configuring FTP
You can upload and download the ZyWALL's firmware and configuration files using FTP, please see
the chapter on firmware and configuration file maintenance for details. To use this feature, your
computer must have an FTP client.
To change your ZyWALL's FTP settings, click REMOTE MGMT, then the FTP tab. The screen
appears as shown.
The following table describes the labels in this screen.
LABEL
Server Port
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secure Client IP
A secure client is a "trusted" computer that is allowed to communicate with the ZyWALL
Address
using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply
Click Apply to save your customized settings.
Reset
Click Reset to begin configuring this screen afresh.
18.14 Configuring SNMP
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. SNMP is a member of the TCP/IP protocol suite. Your ZyWALL supports
SNMP agent functionality, which allows a manager station to manage and monitor the ZyWALL
through the network. The ZyWALL supports SNMP version one (SNMPv1). The next figure
illustrates an SNMP management operation. SNMP is only available if TCP/IP is configured.
Remote Management
ZyWALL 5 Internet Security Appliance
Figure 18-20 FTP
Table 18-4 FTP
DESCRIPTION
18-15