ZyXEL Communications ZyWALL 5 User Manual page 522

ZyWALL 5 Internet Security Appliance
LOG MESSAGE
Unsupported/out-of-order ICMP:
ICMP
Router reply ICMP packet: ICMP
LOG MESSAGE
board %d line %d channel %d,
call %d, %s C01 Outgoing Call
dev=%x ch=%x %s
board %d line %d channel %d,
call %d, %s C02 OutCall
Connected %d %s
board %d line %d channel %d,
call %d, %s C02 Call
Terminated
LOG MESSAGE
ppp:LCP Starting
ppp:LCP Opening
ppp:CHAP Opening
ppp:IPCP Starting
ppp:IPCP Opening
ppp:LCP Closing
ppp:IPCP Closing
LOG MESSAGE
UPnP pass through
Firewall
P-4
Chart P-6 ICMP Logs
The firewall does not support this kind of ICMP packets or the ICMP
packets are out of order.
The router sent an ICMP reply packet to the sender.
Chart P-7 CDR Logs
The router received the setup requirements for a call. "call" is the
reference (count) number of the call. "dev" is the device type (3 is
for dial-up, 6 is for PPPoE, 10 is for PPTP). "channel" or "ch" is the
call channel ID.
For example,
"board 0 line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 "
Means the router has dialed to the PPPoE server 3 times.
The PPPoE, PPTP or dial-up call is connected.
The PPPoE, PPTP or dial-up call was disconnected.
Chart P-8 PPP Logs
The PPP connection's Link Control Protocol stage has started.
The PPP connection's Link Control Protocol stage is opening.
The PPP connection's Challenge Handshake Authentication Protocol
stage is opening.
The PPP connection's Internet Protocol Control Protocol stage is
starting.
The PPP connection's Internet Protocol Control Protocol stage is
opening.
The PPP connection's Link Control Protocol stage is closing.
The PPP connection's Internet Protocol Control Protocol stage is
closing.
Chart P-9 UPnP Logs
UPnP packets can pass through the firewall.
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
Log Descriptions