Set Up User Authentication Using The Radius Server - ZyXEL Communications ZyWall USG 2000 User Manual

Enter the name of the group that is used in
2
it is "Finance". Then, select User/Leo and click the right arrow to move him to the
Member list. This example only has one member in this group, so click OK. Of
course you could add more members later.
Figure 86 Configuration > Object > User/Group > Group > Add
Repeat this process to set up the remaining user groups.
3

7.6.3 Set Up User Authentication Using the RADIUS Server

This step sets up user authentication using the RADIUS server. First, configure the
settings for the RADIUS server. Then, set up the authentication method, and
configure the ZyWALL to use the authentication method. Finally, force users to log
in to the ZyWALL before it routes traffic for them.
ZyWALL USG 2000 User's Guide
Table 21 on page 135. In this example,
Chapter 7 Tutorials
137