Figure 23-3 Menu 1.1 Configure Dynamic Dns; Table 23-2 Menu 1: General Setup (Bridge Mode); Table 23-3 Menu 1.1 Configure Dynamic Dns - ZyXEL Communications ZyWALL 5 User Manual

FIELD
Device Mode Press [SPACE BAR] and then [ENTER] to select Bridge Mode.
IP Address Enter the IP address of your ZyWALL in dotted decimal notation.
Network Mask Enter the subnet mask of your ZyWALL.
Gateway Enter the gateway IP address.
First System DNS Enter the DNS server's IP address(es) in the IP Address field(s) if you
Server have the IP address(es) of the DNS server(s).
Second System
DNS Server
Third System DNS
Server
23.2.1 Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1: General Setup and press [SPACE BAR] to select Yes
in the Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS
(shown next).
Service Provider= WWW.DynDNS.ORG
Active= No
DDNS Type= DynamicDNS
Host Name 1=
Host Name 2=
Host Name 3=
Username=
Password= ********
Enable Wildcard Option= No
Enable Off Line Option= N/A
IP Address Update Policy:
DDNS Server Auto Detect IP Address= No
Use Specified IP Address= No
Use IP Address= N/A
Follow the instructions in the next table to configure Dynamic DNS parameters.
FIELD
Service Provider This is the name of your Dynamic DNS service provider.
Active Press [SPACE BAR] to select Yes and then press [ENTER] to make
dynamic DNS active.
SMT Menu 1 - General Setup

Table 23-2 Menu 1: General Setup (Bridge Mode)

DESCRIPTION
Menu 1.1 - Configure Dynamic DNS
Press ENTER to Confirm or ESC to Cancel:

Figure 23-3 Menu 1.1 Configure Dynamic DNS

Table 23-3 Menu 1.1 Configure Dynamic DNS

DESCRIPTION
ZyWALL 5 Internet Security Appliance
EXAMPLE
WWW.DynDNS.ORG
EXAMPLE
(default)
Yes
23-3