Figure 16-3 Edit Ip Static Route; Table 16-2 Edit Ip Static Route - ZyXEL Communications ZyWALL 5 User Manual

Internet security appliance
Hide thumbs Also See for ZyWALL 5:
Table of Contents

Advertisement

16.2.1 Configuring a Static Route Entry
Select a static route index number and click Edit. The screen shown next appears. Fill in the required
information for each static route.
The following table describes the labels in this screen.
LABEL
Route Name
Enter the name of the IP static route. Leave this field blank to delete this static route.
Active
This field allows you to activate/deactivate this static route.
Destination IP
This parameter specifies the IP network address of the final destination. Routing is always
Address
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
IP Subnet Mask
Enter the IP subnet mask here.
Gateway IP
Enter the IP address of the gateway. The gateway is an immediate neighbor of your
Address
ZyWALL that will forward the packet to the destination. On the LAN, the gateway must be a
router on the same segment as your ZyWALL; over the WAN, the gateway must be the IP
address of one of the Remote Nodes.
Metric
Metric represents the "cost" of transmission for routing purposes. IP routing uses hop count
as the measurement of cost, with a minimum of 1 for directly connected networks. Enter a
number that approximates the cost for this link. The number need not be precise, but it
must be between 1 and 15. In practice, 2 or 3 is usually a good number.
Private
This parameter determines if the ZyWALL will include this route to a remote node in its RIP
broadcasts.
Select this check box to keep this route private and not included in RIP broadcasts. Clear
this checkbox to propagate this route to other hosts through RIP broadcasts.
Apply
Click Apply to save your changes back to the ZyWALL.
Cancel
Click Cancel to exit this screen without saving.
Static Route

Figure 16-3 Edit IP Static Route

Table 16-2 Edit IP Static Route

DESCRIPTION
ZyWALL 5 Internet Security Appliance
16-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents