Figure 7-9 Advanced Setup; Table 7-7 Advanced Setup - ZyXEL Communications ZyWALL 5 User Manual

The following table describes the labels in this screen.
LABEL
AT Command Strings
Dial Type the AT Command string to make a call.
Drop Type the AT Command string to drop a call. "~" represents a one second
wait, for example, "~~~+++~~ath" can be used if your modem has a slow
response time.
Answer Type the AT Command string to answer a call.
Drop DTR When Select this check box to have the ZyWALL drop the DTR (Data Terminal
Hang Up Ready) signal after the "AT Command String: Drop" is sent out.
AT Response Strings
CLID Type the keyword that precedes the CLID (Calling Line Identification) in
the AT response string. This lets the ZyWALL capture the CLID in the AT
response string that comes from the WAN device. CLID is required for
CLID authentication.
Called ID Type the keyword preceding the dialed number.
Speed Type the keyword preceding the connection speed.
Call Control
WAN Screens

Figure 7-9 Advanced Setup

Table 7-7 Advanced Setup

DESCRIPTION
ZyWALL 5 Internet Security Appliance
EXAMPLE
atdt
~~+++~~ath
ata
NMBR
CONNECT
7-17