Figure 8-2 Ip Alias; Table 8-2 Ip Alias - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
The following table describes the labels in this screen.
LABEL
Enable IP Alias 1,2 Select the check box to configure another DMZ network for the ZyWALL.
IP Address Enter the IP address of your ZyWALL in dotted decimal notation.
IP Subnet Mask Your ZyWALL will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask computed by
the ZyWALL.
RIP Direction RIP (Routing Information Protocol, RFC1058 and RFC 1389) allows a router to
exchange routing information with other routers. The RIP Direction field controls the
sending and receiving of RIP packets. Select the RIP direction from Both/In Only/Out
Only/None. When set to Both or Out Only, the ZyWALL will broadcast its routing table
periodically. When set to Both or In Only, it will incorporate the RIP information that it
receives; when set to None, it will not send any RIP packets and will ignore any RIP
packets received.
8-4

Figure 8-2 IP Alias

Table 8-2 IP Alias

DESCRIPTION
Make sure the IP addresses of the LAN,
WAN and DMZ are on separate subnets.
DMZ Screens