Secure Ftp Using Ssh Example; Telnet; Figure 18-16 Ssh Example 2: Log In; Figure 18-17 Secure Ftp: Firmware Upload Example - ZyXEL Communications ZyWALL 5 User Manual

$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password:
The SMT main menu displays next.
3.

18.10 Secure FTP Using SSH Example

This section shows an example on file transfer using the OpenSSH client program. The configuration
and connection steps are similar for other SSH client programs. Refer to your SSH client program
user's guide.
Enter "sftp –1 192.168.1.1". This command forces your computer to connect to the
1.
ZyWALL for secure file transfer using SSH version 1. If this is the first time you are connecting to
the ZyWALL using SSH, a message displays prompting you to save the host information of the
ZyWALL. Type "yes" and press [ENTER].
Enter the password to login to the ZyWALL.
2.
Use the "put" command to upload a new firmware to the ZyWALL.
3.
$ sftp -1 192.168.1.1
Connecting to 192.168.1.1...
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password:
sftp> put firmware.bin ras
Uploading firmware.bin to /ras
Read from remote host 192.168.1.1: Connection reset by peer
Connection closed
$

18.11 Telnet

You can configure your ZyWALL for remote Telnet access as shown next.
Remote Management

Figure 18-16 SSH Example 2: Log in

Figure 18-17 Secure FTP: Firmware Upload Example

ZyWALL 5 Internet Security Appliance
18-13