Figure 20-3 Reports; Table 20-4 Reports - ZyXEL Communications ZyWALL 5 User Manual

Web sites visited the most often
Number of times the most visited web sites were visited
The most-used protocols or service ports
The amount of traffic for the most used protocols or service ports
The LAN IP addresses to and/or from which the most traffic has been sent
How much traffic has been sent to and from the LAN IP addresses to and/or from which the
most traffic has been sent
The web site hit count may not be 100% accurate because
sometimes when an individual web page loads, it may contain
references to other web sites that also get counted as hits.
The ZyWALL records web site hits by counting the HTTP GET packets. Many web sites include
HTTP GET references to other web sites and the ZyWALL may count these as hits, thus the web hit
count is not (yet) 100% accurate.
To change your ZyWALL's log reports, click LOGS, then the Reports tab. The screen appears as
shown.
Enabling the ZyWALL's reporting function decreases the overall
throughput by about 1 Mbps.
The following table describes the labels in this screen.
LABEL
Report Type Use the drop-down list box to select the type of reports to display.
Web Site Hits displays the web sites that have been visited the most often from the LAN
and how many times they have been visited.
Protocol/Port displays the protocols or service ports that have been used the most and
the amount of traffic for the most used protocols or service ports.
LAN IP Address displays the LAN IP addresses to and /or from which the most traffic has
been sent and how much traffic has been sent to and from those IP addresses.
Log Screens

Figure 20-3 Reports

Table 20-4 Reports

DESCRIPTION
ZyWALL 5 Internet Security Appliance
20-5