Chapter 24 Wan And Dial Backup Setup; Introduction To Wan And Dial Backup Setup; Wan Setup; Figure 24-1 Mac Address Cloning In Wan Setup - ZyXEL Communications ZyWALL 5 User Manual

This chapter describes how to configure the WAN using menu 2 and dial-backup using

24.1 Introduction to WAN and Dial Backup Setup

This chapter explains how to configure settings for your WAN port and how to configure the
ZyWALL for a dial backup connection.

24.2 WAN Setup

From the main menu, enter 2 to open menu 2.
The following table describes the fields in this screen.
FIELD
MAC Address
Assigned By Press [SPACE BAR] and then [ENTER] to choose one of two methods
to assign a MAC Address. Choose Factory Default to select the
factory assigned default MAC Address. Choose IP address attached
on LAN to use the MAC Address of that computer whose IP you give
in the following field.
IP Address This field is applicable only if you choose the IP address attached on
LAN method in the Assigned By field. Enter the IP address of the
computer on the LAN whose MAC you are cloning.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.
WAN and Dial Backup Setup
WAN and Dial Backup Setup
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:

Figure 24-1 MAC Address Cloning in WAN Setup

Table 24-1 MAC Address Cloning in WAN Setup

DESCRIPTION
ZyWALL 5 Internet Security Appliance
Chapter 24
menus 2.1 and 11.1.
EXAMPLE
IP address
attached on
LAN
192.168.1.33
24-1