Figure 36-6 Menu 24: System Maintenance; Figure 36-7 Menu 24.10 System Maintenance: Time And Date Setting - ZyXEL Communications ZyWALL 5 User Manual

Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time and
date settings of your ZyWALL as shown in the following screen.
Menu 24.10 - System Maintenance - Time and Date Setting

Figure 36-7 Menu 24.10 System Maintenance: Time and Date Setting

The following table describes the fields in this screen.
System Maintenance Menus 8 to 10
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:

Figure 36-6 Menu 24: System Maintenance

Time Protocol= NTP (RFC-1305)
Time Server Address= a.ntp.alphazed.net
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd):
End Date (mm-dd):
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 5 Internet Security Appliance
08 : 24 : 26
08 : 24 : 04
2004 - 01 - 15
2004 - 01 - 15
01 - 01
01 - 01
36-5