Figure 25-3 Menu 3: Tcp/Ip And Dhcp Setup; Figure 25-4 Menu 3.2: Tcp/Ip And Dhcp Ethernet Setup; Table 25-1 Menu 3.2: Dhcp Ethernet Setup Fields - ZyXEL Communications ZyWALL 5 User Manual

ZyWALL 5 Internet Security Appliance
From menu 3, select the submenu option TCP/IP and DHCP Setup and press [ENTER]. The screen
now displays Menu 3.2- TCP/IP and DHCP Ethernet Setup
DHCP= Server
First address Client IP Pool:
in the IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 128
First DNS Server= From ISP
Size of the IP
IP Address= N/A
Pool
Second DNS Server= From ISP
IP Address= N/A
Third DNS Server= From ISP
IP Address= N/A
DHCP Server Address= N/A

Figure 25-4 Menu 3.2: TCP/IP and DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.
FIELD
DHCP This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays
requests and responses between the remote server and the clients.
When set to Server, the following items need to be set:
Client IP Pool:
Starting Address This field specifies the first of the contiguous addresses in the IP address
pool.
Size of Client IP This field specifies the size, or count of the IP address pool.
Pool
25-2
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
5. Wireless LAN Setup
Enter Menu Selection Number:

Figure 25-3 Menu 3: TCP/IP and DHCP Setup

Menu 3.2 - TCP/IP and DHCP Ethernet Setup
Press ENTER to Confirm or ESC to Cancel:

Table 25-1 Menu 3.2: DHCP Ethernet Setup Fields

DESCRIPTION
,
as shown next.
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
IP addresses of
the DNS servers
EXAMPLE
Server
192.168.1.33
128
LAN Setup