Set Up User Authentication Using The Radius Server; Figure 89 User/Group > Group > Add; Figure 90 Object > Aaa Server > Radius > Default - ZyXEL Communications ZyWALL 1050 User Manual

Figure 89 User/Group > Group > add
3 Repeat this process to set up the remaining user groups.

6.4.3 Set up User Authentication Using the RADIUS Server

This step sets up user authentication (for HTTP/HTTPS access) using the RADIUS server.
First, configure the settings for the RADIUS server. Then, set up the authentication method,
and configure the ZyWALL to use the authentication method for HTTP/HTTPS access.
Finally, force users to log in to the ZyWALL before it routes HTTP/HTTPS traffic for them.
1 Click Object > AAA Server > RADIUS > Default. Configure the RADIUS server, and
click Apply.
Figure 90 Object > AAA Server > RADIUS > Default
2 Click User/Group > Group. Click the Add icon.
3 Give the new authentication method a descriptive name, and click the Add icon. Select
group radius because the ZyWALL should use the specified RADIUS server for
authentication. Click OK.
Chapter 6 Tutorials
ZyWALL 1050 User's Guide
143