Chapter 34 System Information & Diagnosis; Introduction To System Status; System Status; Figure 34-1 Menu 24: System Maintenance - ZyXEL Communications ZyWALL 5 User Manual

34.1 Introduction to System Status

This chapter covers the diagnostic tools that help you to maintain your ZyWALL. These tools include
updates on system status, port status and log and trace capabilities.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown below.

34.2 System Status

The first selection, System Status, gives you information on the version of your system firmware and
the status and statistics of the ports, as shown in the next figure. System Status is a tool that can be
used to monitor your ZyWALL. Specifically, it gives you information on your system firmware
version, number of packets sent and number of packets received.
To get to the System Status:
Enter number 24 to go to Menu 24 - System Maintenance.
1.
In this menu, enter 1 to open System Maintenance - Status.
2.
There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
3.
WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.
System Information & Diagnosis
System Information & Diagnosis
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:

Figure 34-1 Menu 24: System Maintenance

ZyWALL 5 Internet Security Appliance
This chapter covers SMT menus 24.1 to 24.4.
Chapter 34
34-1